Humidity Detector Based on Quartz Crystal Oscillator: Difference between revisions
From pc5271AY2526wiki
Jump to navigationJump to search
| Line 1: | Line 1: | ||
== Results and Discussion == | == Results and Discussion == | ||
A Colpitts oscillator circuit was successfully constructed on a breadboard, and stable oscillation was achieved. The designed oscillation frequency was approximately 6 MHz. For the uncoated quartz crystal, the measured oscillation frequency was 5.9786 MHz, which is consistent with the expected value within experimental uncertainty. | A Colpitts oscillator circuit was successfully constructed on a breadboard, and stable oscillation was achieved. The designed oscillation frequency was approximately 6 MHz. For the uncoated quartz crystal, the measured oscillation frequency was 5.9786 MHz, which is consistent with the expected value within experimental uncertainty. | ||
[[File:5271-1.jpg|200px|thumb| | [[File:5271-1.jpg|200px|thumb|center|Waveform Diagram without coating]] | ||
Revision as of 10:43, 18 April 2026
Results and Discussion
A Colpitts oscillator circuit was successfully constructed on a breadboard, and stable oscillation was achieved. The designed oscillation frequency was approximately 6 MHz. For the uncoated quartz crystal, the measured oscillation frequency was 5.9786 MHz, which is consistent with the expected value within experimental uncertainty.
